Seville Classics UltraHD 20141, Руководство по сборке

Страница: 4 / 7

Step 1. Assemble Top Crossbar (#2)
Note:
Step 2. Adjust the Height of the Leg(#5)
Note:
Step 3. Assemble Leg (#5)
Note: Fasten all screws after this step.
Each Leg (#5) have holes near the bottom of the frame.
Make sure all the holes are facing the back of the unit.
Adjust the height of the workbench before
assembling the Hand Knob (#26-B). Height range
is from 28.5 in. to 42 in.
UltraHD Height Adjustable Workbench (Model No. 20141)
(Pg 3 of 5)
*NOTE: We recommend using TWO people to assemble the work bench.
Open the package, remove and place all parts to the
side. Then open the package of the Solid Hardwood
Top (#3).
Attach both Top crossbars (#2) to the Solid
Hardwood Top (#3). Use 8 pcs Screw E (#40) with
Washer (#27-B) and Wrench (#25) to tighten.
Do not fullly tighten the screws after finish
assembling Step 3.
Attach the Legs (#5) as the left photo shows, line up
screw holes, use 18 pcs Screw E (#40) and Washer
(#27-B) to tighten the leg.
1. Adjust the Leg (#5) to your desired height.
2. Insert 6 pcs of Hand Knob (#26-B) into the leg
tube using Washer (#27-B).
Front
Back
Back
Front