Step 16.
Note
: Pull out the ball bearing
track completely before you
attach drawer.
Place the Drawers.
1.
Pull out the sliders completely, then put the
drawer to the sliders, make sure the square
holes
on the drawer side panels are line up, and
the
drawer is hook on the sliders completely.
2.
Use 4
pcs (#15) Screw B to tighten the
drawer,
and put (#24) Drawer Mat into the
drawer.
Repeat above steps to place other
drawers.
Note: Do not tighten any screws completely
until all the drawers are adjusted well.
Only open one drawer
at a time to avoid
tipping. 40 lbs.
maximum loading for
each drawer.
Hook cutaway view
CAUTION
1
3
*NOTE: We recommend using TWO people to assemble the workbench.
UltraHD® 12-Drawer Rolling Workbench (Model No. 20242)
