Note:
In order to operate the Workbench, you must first initiate a
"Reset"
using the Controller
(refer to
Post Setup Quick Start Instructions
or page
1
4
).
A.
B.
#10
#71
#10
#14
Step 13: Install Power Cord (#11) and Controller (#10).
Please refer to
STEP 8
for installing Power Cord (#11)
and Insert the Power Cord (#11) on to the control box
(pre-installed).
There are two ways to install the Controller (#10):
A.
Install it on the top panel of the Tool Rack Shelf,
place the Controller (#10) in the middle of the top
panel and install it by 2 pcs of
M4 x 10L
Screw
s
(#14).
B. Install the Controller (#10) under the Wood Board
(#3) by 2pcs of
M4 x 15L
Wood Screw
s
(#71).
Now
insert the cable of the control box (pre-installed)
in
to
the Controller (#10).
UltraHD®
Dual Motor
Electric Height
Adjustable Workbench (Model No. 20200)
*NOTE: We recommend using TWO people to assemble the workbench.
Get help with assembly and report damaged or missing parts.
Email:
Telephone:
1 (800) 323-5565
Hours (M-F):
8:30 AM - 4:30 PM (PST)
1
2
