Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
(800) 323-5565 or send an email to [email protected]
Assembly Instructions
STEP 1. Attach Casters
Make sure channels on each
SIDE FRAME (A) face each other.
Push the SLEEVES (E) into the
bottom poles of SIDE FRAME (A).
Push CASTERS (F) and LOCKING
CASTERS (G) into the SLEEVES (E).
Repeat for other SIDE FRAME (A).
STEP 2. Attach Crossbars
Fit a WASHER (I) between SIDE
FRAME (A) and CROSSBAR (B).
Flat side of washer MUST sit in end
crossbar. Curved side of washer
MUST fit against side frame.
Screw BOLT (H) through outer bolt
holes on a SIDE FRAME (A) and
into CROSSBAR (B).
Tighten bolts with Allen Wrench
(L) until snug.
Repeat for remaining bolt holes.
STEP 3. Assemble Drawers
Attach DRAWER PULL KNOBS (K) to
all DRAWERS (D) with SCREWS (J)
and screwdriver.
B. Crossbar (4)
C. Shelf (1)
D. Drawer (10)
E. Sleeve (4)
F. Caster (2)
G. Locking caster (2)
H. Bolt (8)
I. Washer (8)
J. Screw (10)
K. Drawer Pull Knob (10)
L. Allen Wrench
Parts List
A. Side frame (2)
