Parts List
B. Top poles (8)
(Plastic cap on end)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
(800) 323-5565 or send an email to [email protected]
1
D. Shelves (8)
F. Rod bracket (4)
G. Expandable rods (2)
H. U-clips (4)
E. Top shelves (2)
A. Bottom poles (8)
(Threaded end)
C. Slip sleeves (48)
I. Screws (4)
J. Feet (8)
K. Liners (8)
L. Nylon Straps (2)
M. Drywall screws (4)
N. Wood screws (4)
Required Tools
O. Wall anchor (4)
Phillips Screwdriver
Power drill
Wall Strap Installation
STEP 1.
Loop the
NYLON STRAPS (L)
around the side of top-shelf
nearest to the wall.
Use 1 per tower.
STEP 2.
Pull the
NYLON STRAPS (L)
against the wall and mark
holes where you'd like to
install your
ANCHORS (O)
or
SCREWS (M, N)
.
TIP!
Use a stud finder to deter-
mine if you are installing into
drywall or wood.
FOR DRYWALL
Drill a hole in the wall at the
marked point roughly the
depth of the
ANCHOR (O)
.
Screw the
ANCHOR (O)
into
hole until flush.
Screw
DRYWALL SCREW (M)
into
ANCHOR (O)
until snug.
FOR WOOD STUDS
Drill a pilot hole into the wall
at the marked point.
Screw
WOOD SCREWS (N)
into holes until flush.
IMPORTANT
Installing wall straps is not necessary, but it is
highly
recommended.
