Seville Classics AirLift S3 OFF65803 Скачать руководство пользователя страница 5

 

Safety Instructions 

FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND  

OPERATING INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS 

PRODUCT MAY RESULT IN SERIOUS BODILY INJURY  

 

Read and understand this manual before attempting to install or 

 

 

Assure that everyone who uses this product is informed of the contents of this manual. This 

is the responsibility of the Purchaser. 

 

 

Not intended for use by young children or for those persons who require supervision.  

 

Do not open any of the components – legs, control box, or controller. There is a risk of  

electric shock. 

 

Assemble desk on a flat and level surface. 

Before You Begin 

Layout all components and hardware. Visually examine and make sure components are free of 

damage. If there is visual damage to any component, it must not be installed. 
Two people are needed to turn or move the desk and some of it’s components. When moving or 

turning the assembled desk, grab the legs, not the desk top. 
Make sure to assemble on a soft and non-abrasive surface to avoid scratches. 
Check all connections and cables. Make sure control box is connected to a power outlet. 
If the control box makes unusual noises or emits an odor, switch power off immediately.  

Use & Liability 

Safe  use  of this product is possible  only  when  the  operating  instructions  are  read  completely 

and  the  instructions  contained  are  strictly  observed.  Persons  who  do  not  have  the  necessary  

experience  or  knowledge  of  this  product  must  not  use  the  product.  Persons  with  reduced  

physical  or  mental  abilities  should  not  use  this  product,  unless  they  are  under  supervision or 

they  have  been  thoroughly  instructed  in  the  use  of  the  apparatus  by  a  person  who  is  

responsible for the safety of these persons. Children should be closely supervised to ensure that 

they do not play with this product.  

The desk MUST be INITIALIZED before first use.  

Read the INITIALIZATION chapter prior to operation.

 

Содержание AirLift S3 OFF65803

























Отзывы: