Step 1:
Screw the
Leveling Feet (D)
into 4
Bottom
Poles (B).
Step 2:
On the bottom of each pole, fasten a pair of
Slip Sleeves (C)
around the grooves at the
desired shelf height.
Step 3:
Slide a
Small Shelf (E)
over the top of 4
bottom poles until it rests snugly over the slip
sleeves. Repeat steps 2 and 3 by attaching
slip sleeves and another small shelf at the
desired height.
Tip:
It is easier to do this step with the unit on
its side. If necessary, use a rubber mallet to
further secure the shelf.
Step 4:
Once the unit is stable and upright, screw 4
Top Poles (A)
into the bottom poles.
Step 5:
Determine the desired height to install the
Rod
Bracket (F)
. Fasten a pair of slip sleeves
around the grooves on two poles and slide the
rod bracket over the two poles.
Step 6:
Install the 3rd and 4th small shelf at the
desired height. Repeat step 5 to add another
rod bracket.
Note:
Leave enough room above the rod
bracket to install the
Top Shelf (I)
.
2 pcs
Top Shelves
2 pcs
Expandable Rod
8 pcs
Shelf Liners
I
J
K
Assembly Tools
Required
Phillips Screwdriver
8 pcs
Small Shelves
4 pcs
Rod Bracket
4 pcs
Screws (for rod)
4 pcs
U-Sleeve
E
F
G
H
8 pcs
Top Poles
8 pcs
Bottom Poles
48 pairs
Slip Sleeves
8 pcs
Leveling Feet
A
B
C
D
Plastic cap (top)
Threaded (bottom)
Please make sure you have all the parts before starting assembly.
