- 21 -
Playback Operation
Pre-Operation
1.
Connect the DVD Player to power supply.
2.
Press the “POWER” switch to turn on the power of the unit .
3.
Hand the disc with its printed side toward you (Refer to the picture below). Push
the disc in about
¾
of the way. The disc will be imbibed into the player from the
rest of the way automatically.
4.
Adjust the volume with the “VOLUME” adjust knob (also adjust headphone
volume if using headphones).
Read all instructions carefully before using your DVD Player for the first time.
WARNING: Do not play poor-quality discs to avoid damaging the lens.
General operation of some buttons
Play/Pause
Press the
/
Play/Pause button once to pause playback.
Press the
/
Play/Pause button again to resume normal playback.
Stop
During playback, press the STOP or
/
button once to stop playback of a disc.
Press the
/
button and the DVD Player will resume playback of the disc from the
point where it stopped.
A-B
During normal playback, press the A-B button to select the segment that you want to
play repeatedly.
Press once to select the beginning point “A”, press again to select the ending point “B”
and play the segment repeatedly. Press the A-B button again to cancel the repeat
segment.