SEVIC Kitchen Center 2, Руководство пользователя, Страница: 27 / 42

- 27 -
TV Function
The auto memory will take a few minutes. The unit will search channels from the
lowest channel to the highest channel in the standard channel list. When tuning
operations are complete the unit will exit and store the channels by sequence in the
memory.
During tuning, press the
◄ button to exit the auto memory.
Use the
▼
,
▲
direction buttons to select the desired channel from those in memory.
Alarm Setup
Press the SET button on the remote control or the front panel to enter ALARM SET
menu, the screen will display as below:
Use the

,

buttons to select the item you want to set.
Use the

,

buttons to enter the item and to select.
Press the SET button again to exit from the setup menu.
Alarm
Use the

,

direction buttons to select ON or OFF. This function allows you to set the
alarm clock time of this unit.
To set the alarm clock time, first press any number button to enter the time input state.
Then use number buttons to input the desired alarm time in sequence of hour, minute.
Press the

,

direction buttons to switch between am and pm.
You can stop the alarm of the clock in three ways: (1) Press any key on the front
panel for a longer moment. (2) Press OK button on the remote control. (3) Set the
Alarm to OFF in the ALARM SET menu.
If no key is pressed the alarm will stop after three minutes.
ALARM SET
ALARM ON
ALARM _ _: _ _ am
EXIT: SET