- 17 -
System Connections
Connecting To the Power Adapter
This unit is powered via the switching power adapter (supplied). See the below figure
for details:
1. Connect the AC adapter to jack marked with “DC 12V IN” on the rear panel of the
unit.
2. Plug the two-prong end of the power cord to the grounded electrical socket.
3. When not using the unit, turn off the power of the unit first , and then unplug the
power supply to prevent malfunctions.
Connecting to DVB-T Antenna
The unit is designed with an antenna input jack. Plug the DVB-T antenna into the
DVB-T jack on the rear panel of the unit to receive TV signal, then press DVB-T
button on the remote control to switch to the DVB /T mode, as shown below: