SEVIC BLUE LASER SBL0304MP4, Инструкция по эксплуатации

Страница: 12 / 38

11
Parking Brake Inhibit
• Follow the installation circuit diagram. Connect the “ PARKING ” cable to brake switch. There will be
video display until the brake is active. And should be pass through like that:
Initialization is
“ High ” : High — Low — High — Low — wait for 5 sec — video display.
Initialization is “ Low ” : Low — High — Low — High — Low — wait for 5 sec — video display.
In which “ High ” : brake is in non-active state, and operating voltage is high in the circuit.
“ Low ” : brake is in active state and operating voltage is low in the circuit.
The transform time must be less than 2 sec between ” High — Low ” / ” Low — High ” .
When the “ PARKING ” line is impending, no video display.
• Parking brake function is overridden when the video source is set to CAMERA.
• When the parking brake inhibit is active, the front monitor displays Caution, preventing the driver from
watching content while driving.
• All of the above setup prevent the drive from disturbing, ensure safe driving.
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the motion will stop automatically to prevent damage to the
mechanism and monitor.
Normal operation is resumed by pressing the (
) button or disconnecting and reconnecting the power.