Severtson Narrow Fixed Frame Series Скачать руководство пользователя страница 6

Страница: 6 / 7

Install the retaining plate
Screw the retaining plates on the one - hole nuts as

shown

figure 6-3

Install the mounting brackets

1). Secure two mounting brackets with the 1-hole nut in the top frame

using

round

head screws. Do not tighten the screws completely

the brackets

should be able to slide left and right

2).

ecure the circular metal piece to the lower frame

in the same fashion

using

the provided

flat head screws. Do not tighten the screws completely.

6-1

6-2

6-3

Содержание Narrow Fixed Frame Series

Страница 2: ... Ensure that the hook on the spring points down toward the frame 1 2 1 1 One hole Nut Slide 6 one hole nuts into each long frame piece 1 3 Four hole Corner Bracket Slide 1 small sharp end and 1 big round end corner bracket into each end of the long frame pieces as shown in figure 1 3 Note that the small corner bracket should be in the same groove as the nut 1 3 ...

Страница 4: ...of the frame Starting with the opposite corners then the centers as shown in figure 5 1 hook the springs through the material eyelets to secure it in place Then secure the rest of the eyelets with the springs until all eyelets have been secured as shown in figures 5 2 and 5 3 1 2 3 4 5 6 7 8 ...

Страница 5: ... nuts into each long outer frame piece and 2 one hole nuts into each short outer frame piece Attach the outer frames on to the frame as shown in figures 6 1 and 6 2 Smooth out any wrinkles in the material with gloved hands 5 4 5 5 6 2 6 1 ...

Страница 6: ...cure two mounting brackets with the 1 hole nut in the top frame using round head screws Do not tighten the screws completely the brackets should be able to slide left and right 2 Secure the circular metal piece to the lower frame in the same fashion using the provided flat head screws Do not tighten the screws completely 6 1 6 2 6 3 ...