Instruction Manual for Deluxe Curved Series Fixed Frame
Installation Instructions
Take out all the parts from the packaging and verify that all the parts have been included. Then
follow the steps below to install the screen.
1. Locate top, bottom, and side frame pieces (Fig. 1.1) and lay them on a clean, flat surface.
[Figure 1.1]
2. Lay out the frame rails aligned with the corner brackets (Fig. 2.1). Slide a bracket into the
slot at each angled end of the side frame rails (Fig. 2.2) and secure in place with two corner
bracket screws, but do not tighten the screws all the way down. Join the side frame rails to
the upper and lower frame rails, allowing the exposed bracket to slide into the track at the
angled end of the upper and lower frame rails. Secure the corner brackets in place with the
remaining bracket screws and fully tighten all bracket screws (Fig. 2.3). The frame should
now be square at all four corners with no gaps.
2
