background image

10

short-term operation only, i.e. it should not 

be operated continuously for more than 2 

minutes. Allow it afterwards to cool down 

suf

fi

 ciently before switching on again. 

Before using for the 

fi

 rst time

Before the appliance is used for the 

fi

 rst 

time, it must be cleaned as described in the 

section 

Cleaning and care

.

Switch

The appliance is equipped with a 3-position 

switch.

0

  appliance switched off

1

  slow juice extraction

2

  fast juice extraction

Operation

 

 Place  the 

fi

 lter holder onto the drive unit. 

 

 Fit  the 

fi

 lter into its holder, pushing it 

fi

 rmly 

down until it is heard locking into place. 

It is important that the 

fi

 lter is securely 

attached and not at an angle.

 

 Slide the pulp container on the left side on 

the unit under the rim of the 

fi

 lter holder, 

tilting the container slightly. 

 

 Place the transparent lid onto the 

fi

 lter 

holder. The left side of the lid must 

engage in the pulp container. Secure the 

lid with the locking clip, which will activate 

the safety switch. Ensure that the locking 

clip engages 

fi

 rmly on both sides into the 

locking recesses on the lid. 

 

 Slide the splash guard onto the juice 

outlet and place the juice container below 

the outlet.

 

 Insert the plug into the wall outlet and put 

the switch to the required setting.

 

 Feed the clean, pre-cut fruit or vegetable 

pieces down the feeder tube while the 

unit is running. Use the pestle to push the 

pieces down lightly, observing the arrow 

mark and the guide slot on the pestle. 

Caution:

  Excessive pressure may result 

in damage to motor or 

fi

 lter. 

 

 When processing large quantities of fruit 

or vegetables, the pulp container and 

juice container must be emptied from time 

to time as necessary.

 

 After use, switch the appliance off and 

remove the plug from the wall socket.

Juice container

The juice container incorporates a 

removable foam screen. If the juice is poured 

out carefully, the foam caused during juice 

extraction will remain inside the container. 

Cleaning and care

 

 Always remove the plug from the wall 

socket and allow the appliance to cool 

down before cleaning. 

 

 

Please note:

  the 

fi

 lter has small, sharp 

points. 

There is a risk of injury. 

 

 Do not use abrasives, harsh cleaning 

solutions or hard brushes for cleaning.

 

 To avoid the risk of electric shock, do not 

clean the drive unit with water and do not 

immerse it in water.

 

 The drive unit may be wiped with a 

slightly damp, lint-free cloth.

 

 The pulp container, 

fi

 lter holder, splash 

guard, lid, pestle and juice container may 

all be cleaned using hot water and a mild 

detergent. 

 

 The 

fi

 lter should also be cleaned each 

time after use, using a soft, commercially 

available nylon brush.  Do not clean the 

fi

 lter with any hard object, as that may 

render it unusable. 

 

 These parts are not dish-washer safe.

 

 Cleaning of the pulp container is greatly 

Отзывы: