21
142 x 208 mm
Operating the appliance with the remote control
Insert batteries:
∙ Two AAA batteries are required for the remote control. Two batteries are included in the delivery.
∙ Open the battery compartment at the back of the remote control. Insert two batteries. Make sure the polarity is correct.
∙ Close the battery compartment.
Using the remote control
∙ The remote control can only be used within 20 m of the appliance. Obstacles such as walls, cupboards, etc. may prevent
the signal from being transmitted.
∙ If the remote control does not work as described below,
∙ replace the batteries.
or
∙ the remote control and the appliance must be paired again:
1. Switch off the appliance completely by pressing and holding the button for approx. 3 seconds.
2. Press and hold the
button on the appliance and the
button on the remote control simultaneously. Keep them
pressed until the appliance switches on. The remote control and the appliance are now paired.
Symbol
Description
Function
Start/Stop
Starts and stops the appliance.
Forward
The appliance moves forward as long as the button is pressed.
Left
The appliance turns to the left as long as the button is pressed.
Right
The appliance turns to the right as long as the button is pressed.
Back
The appliance turns 180° and then moves forward.
Cleaning at the current location
The appliance cleans a radius of approx. 1.50 m around the current
location and then stops.
Cleaning corners
The appliance cleans the corners of the room and then returns to the
charging station.
Turbo mode
The appliance cleans in turbo mode until the button is pressed again or
until the appliance returns to the station.
To confirm, two acoustic signals sound when the function is switched on
and one acoustic signal sounds when the function is switched off.
In Turbo mode, the appliance cleans with high power, which can lead
to a shorter suction time and the appliance has to be recharged more
quickly.
Setting the time
(see note * below)
Press the button. The hour display flashes and the time can be set
using the buttons. Use the buttons to switch to setting the
minutes. Pressing the button again confirms the entry.
Setting the timer
(see note * below)
To start the appliance at a specific time, the timer can be set as
described in Chapter “Setting the time”.
Confirm the entered time by pressing the button again. The
appliance starts every day at the desired time.
The function is cancelled by pressing and holding the button for 3
seconds.
Charging the appliance
The appliance is sent to the charging station for charging.
* Note: The remote control is set to 12-hr-mode. When setting the time and timer, observe AM (morning) and PM (afternoon)
indications!
Содержание 7026000
Страница 2: ...2 8 2 1 5 4 3 6 7 10 9 ...
Страница 149: ...149 ...