SEVEL BSLM NEW-10 G, Техническое руководство

Страница: 25 / 33

TÜRKÇE
ENGLISH
.Showcase is exposed to very high air
circulation
Thermostat settings are not done
correctly
Showcase is placed near a heating
object (stove, oven, etc.)
Front and back grills of the showcase is
blocked with an object (table, counter,
etc.)
Change the place of the showcase if
there is too much wind and if the
showcase is very close to an A/C unit.
Call Technical Assistance.
Change the place of the showcase.
Either move the objects away from the
showcase or change the place of the
showcase.
5.3.THE COMPRESSOR NEVER Room temperature is too high (over 35C Check Section 5.4. or Call Technical
STOPS OR IT KEEPS
or 95F) Assistance.
FUNCTIONING FOR A VERY LONG
PERIOD OF TIME Condenser is blocked with dust Check Problems & Solutions 5.2.B.
Evaporator is blocked with ice Check Problems & Solutions 5.2.A.
One of the fans may is not working Check Problems & Solutions 5.2.C.
Leakage of gas Check Problems & Solutions 5.2.D.
Sensors may be damaged Call Technical Assistance.
Thermostat is set to a very low Check Section 7-FUNCTIONING.
temperature (-30C/-22F) Set the temperature according to the
values specified in Section 7.
5.4.LIGHT DOES NOT WORK
The light button is turned off. Turn the light button ON.
Fluorescent lamp is not connected Check Section 4.4. or Call Technical
correctly. Assistance.
Starter’s burnt.
Check Section 4.4. or Call Technical
Assistance.
Fluorescent lamp’s burnt.
Check Section 4.4. and change the
fluorescent lamp or call Technical
Assistance.
Reactor’s burnt.
Check Section 4.4. or call Technical
Assistance.
24