7
Installation
Wall Mount Block
Wall Mount Bar
Wall Mount Block
Wall Mount Bar
Mounting Screw
(not included)
Wall Mount Block
Mounting Screw
Wall Mount Block
Wall Mount Block
Leveling Set Screw
“A”
“C”
“B”
CLEAT
C
C
SHIM
SHIM
Beveled
Edge
Below illustrations not applicable.
Mounting Screw
Storm Ultra Bright
Storm
Mounting Screw
(not included)
Wall Mount Block
Wall Mount Bar
Wall Mount Block
Wall Mount Bar
Mounting Screw
(not included)
Wall Mount Block
Mounting Screw
Wall Mount Block
Wall Mount Block
Leveling Set Screw
“A”
“C”
“B”
CLEAT
C
C
SHIM
SHIM
Beveled
Edge
Below illustrations not applicable.
Mounting Screw
Storm Ultra Bright
Storm
Mounting Screw
(not included)
Wall Mount Instructions
Waterproofing Inputs
Connecting your Soundbar
1. Mount the wall mount bar to the wall using appropriate
screws. Make sure the bar is installed level with the display.
When installed, the top of the soundbar will sit approximately
3/8” higher than the top edge of the wall mount bar. The
bottom of the soundbar will be approximately 5.75” below the
top edge of the wall mount bar.
2. Place one wall mount block on either side of the bar, making
sure the set screw is centered in the block prior to placing
it on the bar. Each block should be placed in the recess just
to the outside of the mounting screw for that side of the bar.
The soundbar will rest on these blocks when installed and a
wider placement gives the soundbar more stability. Placing
the blocks too far from the mounting screws may allow the
bar to bend.
3. Place the soundbar on the wall mount, taking care to not
disturb the wall mount blocks. It may be necessary to level
the soundbar slightly if mounted very close to the display.
To adjust, shift the bar slightly to the right or left, using the
angled slots to level.
Included are input caps for the back of the Soundbar. To ensure
proper operation in all weather conditions, these caps must be
used to cover any exposed connections not in use.
Connect any line level audio input to the RCA connectors.
The Soundbar uses an auto detection feature to determine which
RCA input is active. RCA inputs are disabled while Bluetooth is
active.
Cover any unused connections
with included input caps
Wall Mount Block
Wall Mount Bar
Wall Mount Block
Wall Mount Bar
Mounting Screw
(not included)
Wall Mount Block
Mounting Screw
Wall Mount Block
Wall Mount Block
Leveling Set Screw
“A”
“C”
“B”
CLEAT
C
C
SHIM
SHIM
Beveled
Edge
Below illustrations not applicable.
Mounting Screw
Storm Ultra Bright
Storm
Mounting Screw
(not included)
