8
Operation and Storage Requirements
Mount the device in such a way that it is protected against moisture. To prevent fire or electric shock, never
allow liquids to enter the unit. The uninstalled product must be stored in dry and well-ventilated rooms,
without extreme temperature fluctuations. Heat sources and aggressive active substances may not be stored
in the proximity of the device. The required storage temperature is
-24°F to 140°F
. The device must be
stored in the complete packaging, as delivered. The product must not operate on average more than twelve
(12) hours per day on a permanent or extended periodic basis. The product must have proper, correct and
sufficient AC supply voltage.
Screen Health
The 4K liquid crystal panel is a high technology product with 8,294,400 pixels, giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please
note that this does not affect the performance of your product. Pixel errors outside of Séura’s specified
and permitted area are covered under Séura’s limited product warranty. Please inquire directly with Séura
Technical Support regarding Séura’s Pixel Policy.
Installation Environment
Avoid direct light or sun exposure, direct proximity to heat sources. Do not place any heat sources such as
radiators and heat registers, etc. near the monitor. To reduce eye strain, avoid installing the Séura Television
Mirror against a bright background such as a window. Position the monitor at the height of your eye level.
Position the monitor directly in front of you at a comfortable viewing distance.
Séura’s Television Mirrors can weigh up to 240 lbs (fluctuates based on custom mirror size and frame type).
Verify that the wall or mounting surface can support the necessary hardware and weight of the television
mirror.
Clearance of 1-1/4” is required on the top, sides, and bottom of the product.
IMPORTANT
The display should not be installed directly over a
flat surface if heavy or driving rain may puddle and
splash up onto the lower portion of the display.
Direct sunlight on the display screen will heat
internal components and should be avoided.
IMPORTANT
Le moniteur ne doit pas être installé directement sur une
surface plane, si de fortes pluies ou de conduite peut
flaque d’eau et éclabousser sur la partie inférieure du
moniteur. Lumière directe du soleil sur l’écran du moniteur
va chauffer les composants internes et devrait être évitée.
