9
Installation
Refer to the included custom drawing package for specific
dimensions and instructions for your custom product.
1. Verify that the wall is prepared appropriately. If the product is
an in-wall, or “Recessed” configuration, verify the dimensions of
the rough opening.
2. Install mounting brackets according to the dimensions and
instructions shown on “Sheet 3” of the included drawing
package. Ensure mounting brackets are securely fastened using
framing members where possible.
NOTE:
Take care when moving the product. Always transport the
product with at least two people.
WARNING:
Always transport the product in a vertical position.
Moving the product in an unsupported horizontal position may
result in product flex or damage.
3. Connect power supplies and audio/video components.
• Test all electrical and electronic devices to verify proper
integration and functionality before securely mounting it to
the wall.
NOTE:
If you opt to remote-locate the SMART module, it may be
removed from the back of the mirror. SMART extension kits are
available (sold separately) that allow the SMART module to be
located as far as 20’ away from the mirror.
4. Position SMART Mirror close to wall surface and securely
engage mounting brackets.
• Allow for a ¼" ventilation gap for proper air flow and heat
transfer.
5. Check to ensure the SMART Mirror is fully engaged and secure
to the mounting brackets.
NOTE:
All Séura drawing packages indicate generalized nominal residential wood framing construction, and are not indicative of any
particular building code. It is the installers responsibility that all electrical, audio/visual, and framing construction are code
compliant to the municipality in which the product is being installed. Modifications made to Séura recommendations are at the sole
discretion of the installer and release Séura of all liability.
30"CENTERED
33"
42"
1112"
10"
1112"
28116"
6"
71516"
158"
138"
4058"
A
MIRROR
OUTLINE
DETAIL A
SCALE 1 : 5
VERTICAL DIMENSIONS ARE TO
CENTER OF MOUNTING SLOTS
INSTALLATION INSTRUCTIONS:
Reference the dimensions on this sheet to properly locate the wall brackets on the mounting surface.
•
Wall brackets must have mounting screws in both end slots.
•
If it is not possible to mount to the wall framing members, use the supplied toggle bolts into
•
minimum ½-inch thick drywall. Toggle bolt instructions are included in the fastener packet.
Hold mirror assembly close to wall, connect A/V and power, and verify functionality.
•
Hang mirror assembly. Ensure the brackets are interlocked and mirror is secure.
•
POWER &
A/V WITH IN
THIS AREA
-
20 FEB 2018
Date Created
-
Drawing ID Number
C-S-3342-27.5S-V2-SMT
Model Number
Revised Date
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DOCUMENT
IS THE SOLE PROPERTY OF THE MANUFACTURER. ANY
REPRODUCTION IN PART, OR AS A WHOLE, WITHOUT
THE WRITTEN PERMISSION OF MANUFACTURER, IS
PROHIBITED.
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/8"
ANGULAR: 1.0
TWO PLACE DECIMAL: .03"
THREE PLACE DECIMAL: .015"
SHEET
3
114" VENT GAP
SIDE DETAIL VIEW
SCALE 1 : 2
MIRROR SURFACE
INTERLOCKING BRACKETS
REMOVEABLE SIDE PANEL
SMART CONTROL MODULE
MOUNTING LOCATION B
MICROPHONE
MOUNTING SURFACE
A/V POWER
LOCATION
INTERLOCKING BRACKETS
27" High-Definition TV Specifications
Screen Size (Diagonal): 27-inch
Format: 16:9
Brightness: 700 cd/m2
Viewing Angle: 170° Horizontal/Vertical
Contrast: 4000:1
Response Time: 6ms
Native Resolution: 1920 X 1080
Backlight: LED
Menu Languages: English, French, Spanish
Tuner:
ATV: NTSC
Digital: ATSC/QAM
Video:
75 Ohm Coaxial Antenna X 1
Composite Video, Audio L, Audio R (RCA plugs) X 1
Component YPbPr (RCA plugs) X 1
S-Video Mini 4-pin DIN X 1
VGA 15-pin D-sub Female X 1
HDMI Type A X 2
USB Type A X 1
Audio:
Amplified Internal Speakers: 2 X 5W
Amplified Output for External Speakers: 2 X 5W
Amplified Output: Terminal Block
Constant Line Output: 3.5mm Jack X 2
Control:
RS232: 9-pin DB9 Female X 1
IR IN: 3.5mm Jack X 1
IR OUT: 3.5mm Jack X 4
Power:
Input: 110-240 VAC, 50-60Hz, 1.5A
Type A NEMA Plug
Requires GFCI Protected Outlet
27" SMART Display
Android 7.1 Rockship RK3399
CPU:
Six-Core ARM 64-bit processor, 2.0GHz
RAM:
Dual Channel DDR3 - 1333MHz (1GB/2GB/4GB
Optional)
Memory:
16 or 32 GB
WI-FI:
2.4GHZ/5GHz Dual-Frequency (Support
802.11a/b/g/n/ac protocol, 2x2 MIMO)
Bluetooth:
4.1 (Support BLE)
Ethernet:
10/100/1000Mbps
Power:
Input: 110 VAC, 2A
SMART CONTROL MODULE
MOUNTING LOCATION A
REMOTE LOCATION
-
20 FEB 2018
Date Created
-
Drawing ID Number
C-S-3342-27.5S-V2-SMT
Model Number
Revised Date
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DOCUMENT
IS THE SOLE PROPERTY OF THE MANUFACTURER. ANY
REPRODUCTION IN PART, OR AS A WHOLE, WITHOUT
THE WRITTEN PERMISSION OF MANUFACTURER, IS
PROHIBITED.
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/8"
ANGULAR: 1.0
TWO PLACE DECIMAL: .03"
THREE PLACE DECIMAL: .015"
SHEET
2
www.seura.com
PH. 920.857.9069
FAX 920.857.9490
42"
33"
41316"
2338"
41316"
13116"
17716"
1112"
27"
SMART
DISPLAY
1/2" LIFT-OFF CLEARANCE REQUIRED
112"
TOTAL
DEPTH
Drawing ID Number
Item and Description
Revised Date
Reseller
SHEET
1
DATE:
SIGNATURE:
NOTE:
PLEASE SIGN AND DATE THIS PAGE BEFORE RETURNING TO SEURA, SIGNIFYING YOU AGREE TO ALL
SPECIFICATIONS SHOWN ON ALL DRAWING SHEETS. THE BUILD PROCESS WILL NOT BEGIN WITHOUT AN
AUTHORIZED SIGNATURE. FOR DRAWINGS THAT REQUIRE REVISIONS, SEND THE REVISIONS TO SEURA
NOTED ON THE ORIGINAL DRAWINGS. A REVISED DRAWING PACKAGE WILL BE RE-SENT FOR SIGNATURE.
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/8"
ANGULAR: 1.0
TWO PLACE DECIMAL: .03"
THREE PLACE DECIMAL: .015"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DOCUMENT
IS THE SOLE PROPERTY OF THE MANUFACTURER. ANY
REPRODUCTION IN PART, OR AS A WHOLE, WITHOUT
THE WRITTEN PERMISSION OF MANUFACTURER, IS
PROHIBITED.
-
Date Created
-
20 FEB 2018
-
C-S-3342-27.5S-V2-SMT
33" (W) x 42" (H) Custom Surface SMART Mirror with 27" SMART Display and Vanishing Vanity Glass
