Seuic UTouch, Справочное руководство

Страница: 53 / 77

50
(1) Card searching method: There is no filtering mode by default. If you want to select
the filtering mode, please enter the filtering condition. The labels that do not meet the
screening conditions will be filtered out according to the filtering conditions after
card searching;
(2) Single card searching: Click to execute a single card searching;
(3) Continuous card searching: Click to execute continuous card searching;
(4) BANK: It is used together with card reading / writing to conveniently select password
area, User area, EPC area and TID area;
(5) Address: It is used together with card reading / writing to select the address bit of
reading or writing;
(6) Length: It is used together with card reading / writing to select the length of reading
or writing;
(7) Password: It is used together with card reading / writingand is the password used in
card reading / writing;
(8) Card reading: Read the data of the set position, and the data read is displayed in the
text box below the card reading button;
(9) Card writing: Write the data of the set position. For the data to be written, please
input it in the text box below the card writing button;
(10) Clear: Clear the contents of the text box below the card reading / writing;
(11) Lock: lock a certain area of the label, and select EPC, TID, USER, RESERVED;
(12) Unlock: Unlock a certain area of the label, and select EPC, TID, USER and
RESERVED;
2. Select [Hardware Settings] to enter the UHF module hardware settings
interface, and in this interface, you can set the card searching power (1 ~ 30) and read
the UHF module temperature.