Seuic AUTOID Q7 Series, Руководство пользователя

Страница: 100 / 103

94
Chapter 9 Troubleshooting
Problem Cause Solution
When pressing the power
button, the AUTOID Q7 does
not turn on.
Critically low battery
level or the battery is
completely discharged.
Fully charge the battery or
replace the battery.
The battery may not be
seated properly.
Insert the battery properly.
System crash. Perform a soft reset.
The rechargeable battery did
not charge.
Battery failed. Replace the battery.
Battery temperature is
too high or low. Put the battery at room
temperature.
No sound.
Volume setting is low or
turned off.
Adjust the volume.
The AUTOID Q7 shuts off.
The AUTOID Q7 is
inactive
The display turns off after
a period of inactivity. Set
this period of from 15
seconds to 30 minutes, or
never go into sleep.
The battery is completely
discharged. Charge or replace the
battery.
The AUTOID Q7 does not
decode with reading bar
code.
Scanning application is
not loaded. Load a scanning application
on the AUTOID Q7.
On the bar code settings
or application settings
interface. Set the scan application to
the scan interface, or hide
the scan application.
Unreadable bar code.
Ensure the symbol is not
defaced.
The barcode decoding
function is not enabled.
Enter bar code settings and
enable the corresponding
decoding function.
The brand‐new is not
programmed for this bar
code.
Distance between exit
window and bar code is
incorrect.
Place the AUTOID Q7 within
proper scanning range.