Seuic AUTOID Pad Series, Справочное руководство, Страница: 59 / 95

55
Figure 8-3 Basic Settings
4.
Open [Application Settings], where you can turn on/off settings for scanning,
as shown in Figure 8-4:
(1) Scan sound: if on, sound alert during scan.
(2) Vibration: if on, vibration during scan.
(3) Barcode appending: if on, continuous output of barcode.
(4) Auto-clear: auto clear the last barcode after successful scan.
(5) Autostart: if enabled, auto start the scanner application upon boot.
(6) Show barcode type: when on, show barcode type during scan.
(7) Hold to scan: if enabled, the scanning light immediately goes out when the
scan key is released; if disabled, the scanning light continues until the [Continues
Scan Duration] is reached after the scan key is released.
(8) Repeat scan: if enabled, the scan will automatically go on continuously.
(9) Interval time: configurable, the interval time from the completion of barcode
scanning to the next scan.
(10) Restore barcode default: can restore the barcode default settings, as shown
in Figure 8-5.
(11) Barcode suffix: can add barcode output suffix (can be numbers, letters,