Seuic AutoID 9 Скачать руководство пользователя

Страница: 17 / 104

the battery will drain quickly. You should close some services and

features that use battery to save power.

➢

In order to avoid the work inconvenience caused by low battery

power, it is recommended that you prepare a fully charged battery or

connect an external power supply at work.

Note: If you do not use the product for a long time, please charge the

device at least once every two months.

5.4 Notes for battery use

➢

If the battery is completely discharged, the device can

’

t be turned on

immediately. This is a normal phenomenon. Allow the depleted

device to be charged for a few minutes before turning on the device.

➢

The battery can be charged repeatedly, but the battery is a consumable

product. Please replace a new battery if you find the device's standby

time is greatly reduced.

➢

Battery charging time changes with temperature and battery usage.

Please charge it at a reasonable temperature range.

➢

When the battery is in low power, the device will give the low-power

warning. When the battery power is too low, the device will

automatically shut down.

Содержание AutoID 9









































































































Результаты поиска

Содержание AutoID 9

Отзывы:

Похожие инструкции для AutoID 9

Бренды по названию

Популярные бренды

Seuic AutoID 9, Руководство пользователя

Результаты поиска

Содержание AutoID 9

Отзывы:

Похожие инструкции для AutoID 9

Бренды по названию

Популярные бренды