2
1.0 Introduction
The Setra LITE Construction Kit provides everything needed to monitor pressurized spaces
around on-site construction or fume-extraction. The kit can also be used to verify pressurized
isolation of temporary spaces such as renovations, loss of power conditions, and temporary
isolation rooms. Simply place the kit outside the work area and run the flexible tubing inside the
pressurized space to provide continuous differential pressure readings and visual alarming.
The visual indication on the kit is provided via the Setra LITE pressure monitor. The Setra LITE
features an LED light ring that will glow red if room pressurization violates the configured alarm
threshold. The design of the light ring allows the room status to be visible from a distance,
even from down a hallway. With a simple press of the front lens of the unit, the LCD displays
the reading of the current differential pressure. Configuration of the unit can be performed on
the device via buttons located behind the removable front lens. The unit can be put into and
taken out of “Standby” mode by pressing the front lens 3 times in quick succession.
2.0 Key Features
2.1 Case
The Setra LITE Construction Kit comes in a convenient easy to carry case which is designed
for the most rugged applications but still compact enough to provide pressure monitoring in
a minimally invasive footprint (12” x 15” x 7”). The case is IP67 (NEMA 6) rated and includes
auto venting for air travel. The lockable case is also padlock-ready for added security while
travelling or while on site.
Conveniently located on the outer side of the case are all the connections needed for power,
pressure sensing, and signal wiring. As shown in the image below, the AC power jack
(provided) plugs into the side or the toggle button can be used to operate on battery power
(provided) instead. The 2-wire output signal is available to connect to from the side of the case
to run an analog output to a local BAS or monitoring system for advanced visualization and
data logging of the pressure readings. The pressure tubing (provided) connects to the quick
disconnect tubing port on the side to be run into the pressurized space being monitored.
AC Power Jack
Switch from AC to Battery
Power as needed
2-wire output signal available
for remote monitoring.
Quick disconnect tubing port
