Setra Systems BL-4100S, Руководство пользователя, Страница: 11 / 39

11
5. Perform the necessary weighing procedures on the balance.
6. Press the
PRINT
key on the balance.
NOTE: If using label stock, the form feed command must be programmed
in User Setups (see Appendix I). When using a printer other than the
CoStar SETRA 250, set the baud rate and parity of your balance to
match the printer (see Appendix I, User Setups to select the print
mode, baud rate and parity).
REPETITIVE PRINTING
It is sometimes desirable to measure weight at fixed intervals of time. One
use of this procedure is evaporation studies. To print out weight at fixed
intervals, refer to SETTING THE PRINT FUNCTION in Appendix I: User Setups.
Once the time interval has been selected proceed as follows:
1. Press
PRINT
to begin the repetitive printing procedure.
2. Press PRINT again to stop the procedure.