www.setolite.com
© SETOLITE Lichttechnik GmbH
Alle Rechte, einschließlich Übersetzung behalten wir uns vor. Die vollständige oder teilweise Vervielfältigung ist nur mit schrift-
licher Genehmigung des Herausgebers zulässig. Die Angaben in diesem Dokument entsprechen dem technischen Stand bei
Drucklegung, Änderungen in Technik und Ausstattung, sowie Irrtümer und Druckfehler vorbehalten.
In order to remove dirt, dust, oil, grease, etc., use
a soft cloth that is lightly moistened with a mild
soap solution or water. Afterwards, dry it off with a
soft, dry cloth. Do not use corroding substances or
solvents for the cleaning.
Cleaning and care
Type
SETO CLIPLIGHT ONE
Illuminant
LED TECHNOLOGY
Color temperature
Cool white
Battery type / capacity
Li-Polymer 3.7V 400mAh
charging time
1 hour 30 minute
Size
38.6 x 63.6 x 24.3mm
Weight
30g
Model No.
CLP-300BK
Input
USB 5V 1A
Technical data
All rights, including translation, are reserved. Reproduction of any kind, for example photocopying, microfilm or data processing
equipment are forbidden without the written permission of the publisher. Reprint, also partly is forbidden. The operating
instructions reflect the current technical state of printing. Changes in technology and equipment, as well as errors and omissions
are reserved.
DEUTS
CH
ENGLISH
ENGLISH
Rev. 1.0
1.
Light turns on when pushing On / Off button
shortly. Repeat to turn off the light
2.
When light is on, push and hold On / Off button
to adjust brightness to increase brightness. Push
and hold On / Off button once again to decre-
ase brightness. Flicker once when it reaches
Maximum / Minimum brightness.
3.
When light is on, push Mode change button
shortly to change 3 different light mode (Fo-
cused light > Diffused light (front) > Diffused
light (top))
4.
When light is on, push Mode change button
over 2 seconds to make SOS signal on each
mode.
Operating
Diffusion LED
(top)
Mode change button
(SOS flash)
On / Off button (dimming
control)
Battery level
indicator
Diffusion LED
(front)
Focused LED
Optic lens
Clip
Hook
USB charging port
Installation color filter
To use the red light, please attach provided red
film to diffused light (front).