8
ENGLISH
Warranty
With regard to warranty and guarantee regulations, the terms and conditions valid at the time of purchase apply.
Take a look at our latest sites at www.setolite.com
Safety information
This quality product has been manufactured according to current technical standards, tested and delivered in a safe condition.
In order to maintain this condition and to ensure safe operation, the user must observe the notes and warnings in these
instructions for use.
It is to assume that a safe operation is not possible
• if the rope light shows visible damage.
• if the rope light is no longer working properly.
• after prolonged storage under inconvenient conditions.
• after heavy transport stresses.
In these cases, the rope light must be sent in for repair.
ATTENTION!
•
Do not operate the SETO LED SNAKE / SETO LED DOUBLE-SNAKE while it is wound up.
• To avoid overheating, avoid contact between flexible rope lights and parts of rope lights.
• The rope light must not exceed a maximum length of 50 m.
• Do not fold or bend the
SETO LED SNAKE / SETO LED DOUBLE-
SNAKE
.
• Do not bend the
SETO LED SNAKE / SETO LED DOUBLE-SNAKE
to a diameter of less than 25 mm.
• The rope light can only be bent vertically, not horizontally.
• Operation outside the permissible tolerances of ± 10 percent can
cause damage to the rope light.
• Do not cover the product as the cover may cause the rope light to
overheat, melt or catch fire.
• Do not pierce, cut or shorten the
SETO LED SNAKE / SETO LED
DOUBLE-SNAKE
.
• Do not run the cable or the rope light through walls, doors,
windows or similar parts of the building structure.
• Do not immerse the rope light in liquids and do not use the product near standing water or other liquids.
• Do not install in cabinets, tanks or enclosures of any kind.
• Do not subject the
SETO LED SNAKE / SETO LED DOUBLE-SNAKE
to constant bending.
• Do not secure this product or its cable with staples, nails or similar means that will damage the insulation.
INFORMATION!
Repairs to the rope light must be carried out only by the manufacturer, his customer service department or a qualified
electrician. A qualified electrician has the professional training, knowledge and experience, as well as knowledge of
the pertinent standards, to assess the work they are required to carry out and recognize possible hazards. Warranty
repairs are carried out only by the manufacturer.
Do not operate when wound up!
Connected length must not exceed 50 m,
as this will damage the rope light!
< 50 m