2 of 9
SET-2110
Technical Description
Issue
02
24/05/2022
Safety Guidelines
Caution
Do not operate the SET-2110 in a manner not
specified
in this document. Product
misuse can result in a hazard. You can compromise the safety protection built into the product
if the product is damaged in any way. If the product is damaged, return it for repair.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for electromagnetic
compatibility (EMC). These requirements and limits provide reasonable protection against harmful
interference when the product is operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may occur in
some installations, when the product is connected to a peripheral device or test object, or if the
product is used in residential or commercial areas. To minimize interference with radio and television
reception and prevent unacceptable performance degradation, install, and use this product in strict
accordance with the instructions in the product documentation.
Furthermore, any changes or
modifications
to the product not expressly approved by SET GmbH could
void your authority to operate it under your local regulatory rules.
Caution
To ensure
the specified EMC
performance, operate this product only with shielded
cables and accessories.
Caution
To ensure
the specified
EMC performance, the length of any cable attached to
connectors J1 and J2 must be no longer than 3 m (10 ft.)