SES-DSLR-PROMIX Features
SES-DSLR-PROMIX Set Up
Read and follow all steps below before operating the device.
NOTE: If your camera or camcorder has an Automatic Gain Control
(AGC) function, turn it off.
1. Turn off POWER and PHANTOM switches.
2. Lift up and pull out battery compartment drawer. Insert 9V
battery and slide drawer closed until it clicks into place.
3. Mount the audio mixer on the camera mounting shoe using the
lock knob.
4. Connect the supplied cable to the output jack of the mixer and
to the MIC input of the DSLR camera, camcorder, or other
destination equipment. If there is a MIC/Line switch on the
camera, select it to MIC.
SESCOM SES-DSLR-PROMIX
Page 5
Volume Control Knob
Adjusts the headphone volume level
PHONES
Headphone jack to monitor the audio from microphones or
camera
3/8" Female Screw
1/4" Female Screw
15
16
17
18
17
17
18
18