SES SE-2054-2, Руководство пользователя

Страница: 18 / 24

SEALED ENERGY SYSTEMS ®
18 User Manual
Battery Critical Messages
Function
Command
Code
Description Unit Access
Alarm
Warning()
0x16
This message is to the host and/or charger to
notify them that one or more alarm conditions
exist.
word W
Alarm Bit Definitions
Bit Battery Status Set When:
Action When
Set:
Cleared When:
15
OVER_CHARG
D_ALARM
Remaining Capacity() exceeds
Full Charge Capacity() +
300mAh.
Stop
charging. A continuous discharge of
>= 300mAh.
14
TERMINATE_C
HARGE_ALARM
Primary Charge Termination,
Cell Over-Voltage (COV),
Over-Current Charge (OCC),
Over-Temp Charge (OTC)
conditions.
COV = 4300mV
OCC = 3500mA
OTC = 58ºC
Stop
charging.
Relative State of Charge()
<= 95%, COV, OCC or
OTC recovery threshold.
COV recovery <=
4150mV
OCC recovery <= 200mA
for 70 sec
OTC recovery <= 56
O
C
13 Reserved
12
OVER_TEMP_
ALARM
Over-Temp Charge (OTC) or
Over- Temp discharge (OTD)
condition. OTC=58ºC
OTD=75ºC
Appropriate
FET will be
disabled.
OTC or OTD recovery
threshold. OTC recovery
=56ºC
OTD recovery =65
O
C
Bit Battery Status Set When:
Action When
Set:
Cleared When:
11
TERMINATE_DI
SCHARGE_ALA
RM
Relative State of Charge() <=
0%, Cell Under-Voltage (CUV)
Over-Current Discharge
(OCD), Over-Temp Discharge
(OTD) conditions
CUV = 2400mV
OCD = -8250mA
OTD = 75
0
C
Stop
discharging.
Relative State Of
Charge() >= 1%, CUV,
OCD or OTD recovery
threshold. CUV recovery
>= 3000mV
OCD recovery >= -200mA
for 70sec OTD recovery
<= 65ºC
10 Reserved
9
REMAINING_
CAPACITY_
ALARM
(User settable)
Remaining Capacity() <
Remaining Capacity Alarm(). User
defined.
Remaining Capacity
Alarm() = 0 or
Is<= Remaining
Capacity().
8
REMAINING_TI
ME_ALARM
(User settable)
Average Time To Empty() <
Remaining Time Alarm(). User
defined.
Remaining Time Alarm()
= 0 or
<=Average Time To
Empty().
Status Bit Definitions
Z Battery Status Set When:
Action When
Set:
Cleared When:
7 INITIALIZED None.
6 DISCHARGING
Battery is not in charge
mode.
None.
Battery is in charging
mode.
5
FULLY
CHARGED When the battery detects a
primary charge termination. Stop
charging. Relative State Of
Charge() <= 95%.
4
FULLY
DISCHARGED Relative State of Charge()
<= 0%. Stop
discharging. Relative State Of
Charge() >= 20%.