manualshive.com logo in svg

ServSwitch ACU1001A, Руководство пользователя

Поделиться
Скачать
ServSwitch ACU1001A Скачать руководство пользователя страница 16

15

CHAPTER 3: Introduction

3.1 Compatibility

The Extender is designed to operate in various environments and with a mix of
hardware from different manufacturers. During development, this product was
extensively tested with a wide variety of hardware. However, please note that it is
impossible for us to guarantee that the Extender will  interoperate correctly with
every keyboard, mouse, monitor, and motherboard variant currently on the
market; if you suspect that you’re having incompatibility problems, please call
Black Box Technical Support.

In general, the Extender is compatible with the following types of equipment:

•

CPU:

IBM

®

PC/AT

®

, PS/2, and 100% compatible clones. These should be

desktop machines; laptops and docking stations are not supported.

•

Monitor:

VGA, SVGA, XGA, XGA-2, or RGB (sync on green). Be aware that a

few monitors and graphics cards might not work with the Extender because
they exchange monitor IDs or VESA DDC (Display Data Channel)
information. Call Black Box Technical Support for help with “ID bit”
problems. As for DDC, the Extender supports it at the local user station but
not the remote user station, so either (a) do not use a DDC monitor at your
remote station, or (b) go into the settings of each PC’s graphics card, turn
DDC off, and manually configure the card for your monitor.

•

Keyboard:

Standard PS/2 type (101- or 102-key) or enhanced PS/2 type

(104- or 105-key, designed for use with versions of Windows

®

starting with

Windows 95). Also supports PC/AT type keyboards with 5-pin DIN connectors,
but you’ll need keyboard and keyboard-port adapters such as our product
codes FA211 and FA212 to attach such keyboards and their native CPUs to the
Extender. Some older PC/XT™ or PC/AT type autosensing keyboards might
not be compatible with the Extender. If a keyboard or keyboard port you want
to use is some other type or has some other type of connector, call Black Box
Technical Support.

For information about keyboard typematic support, see 

Section 7.2

.

•

Mouse:

Standard PS/2 type, Microsoft

®

IntelliMouse

®

compatible, or Logitech

®

3-button PS/2 compatible mouse and standard PS/2 type mouse ports. The
Extender is

not

compatible with serial mice, bus mice, or CPUs with bus-mouse

ports. If you need to attach a PC with a PC/AT type serial mouse port, run a
PS/2 mouse-extension cable to the CPU, then use a mouse-port adapter such
as product code AC244A to connect the cable to the PC’s serial mouse port.

If a mouse or mouse port you want to attach is some other type or has some

other type of connector, call Black Box Technical Support.

Содержание ACU1001A































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды