www.servore.com
10
8. Cautions
■
The ServoGlas
Ⓡ
6000 is designed for personal eye and face protection from
harmful radiation, sparks and welding spatter produced under normal welding
conditions. Please follow good industry and safety practices and use additional
protection where necessary.
■
Cover plates are strong and of industry standard quality but they are breakable.
The ServoGlas
Ⓡ
6000 is a quality welding helmet but is not designed to provide
protection from severe impact such as broken grinding wheels or debris from
other broken tools, corrosive liquids, explosions, or other extreme incidents.
We recommend you always adopt a conservative attitude towards safety and
take additional precautions as required and recommended in the relevant
safety standards relating to the operation you are undertaking.
■
The welding filter is not designed to be waterproof. Please do not use your
helmet in the rain or other inclement weather. To do so may reduce the life of
your helmet and result in damage or injury.
■
In the event that your helmet or welding filter is exposed to direct contact with,
or is submerged in water or other liquid immediately stop using the helmet,
remove the filter cartridge from the shell, remove the batteries from the filter,
inspect carefully for damage and if necessary mop-up excess moisture with a
paper towel and then leave to dry in a warm (not hot) place out of direct
sunlight. Never place your helmet in an oven or microwave to dry. Before use
perform all normal system checks and if in any doubt contact your ServoGlas
Ⓡ
distributor. Your Servore helmet is a precision engineered professional
protection product and must be maintained in good condition to ensure your
personal protection.
Cautions
우노다시다시 2013.01.15 04:10 PM 페이지10 왼쪽 PDF_MONO 2400DPI 175LPI T
