Information
1. Safety Precautions-Read Before Use.
These welding goggles are designed for use by professionals with a full
understanding of the hazards and safety risks associated with welding.
�
Please be sure you understand how to use this product and how
L!..l
to use it safely. If you are uncertain. do not use this pr
o
duct as
misuse may result In serious and/or permanent mIury. When
used in conjunction with other personal protective equipment
these goggles provide protection against the hazards of welding
but are not designed or intended to be used without other appro
pnate protective equipment.
These goggles only provide protection for the welder's eyes and
additional appropriate protection must be used for other areas of
exposed skin such as the face and neck.
�lvvays check that the goggles are ready for use by pressing the
L.m
ON switch. Depending on the previous settings. an LCD will blink.
I
'r
Select the correct shade according to the shade selection guide
� on page 7.
&
Adjust the sensitivity according to the working conditions .
.=]
�
Do not wear the goggles when not actually welding or when
L!..l
walking around as this may result in accident or injury.
-- - - -
---'
J\rcshield· Il
2. Product specifications
Switching speed
Shade Adjustment
--
Sensitivity
AdIustment
Delay AdIustment
Battery/ Lifetime
Sensor
Grinding
Weight
1 /25.000 sec.
Light state #3
Dark state
#5-8 cutting mode
#9-13 welding mode
Photo mode 5 Levels(Low-high)
RF mode
5 Levels(Low-high)
I Levels \tast-slow)
One CR2450 Lithium battery /1000 h
Dual sensing(RF+Photo)
Power off /Shade #3
Goggle 260 g
-
Goggle with shield 348 g
Operating Temp.
-5t - +55t
Storage Temp.
-20t - + 70t
--+----------
Range of use
Grind. Gas welding&cutting. Arc/MIG/TIG welding
On/Off
Shade control button
Sensitivity control button
Delay control button
