MultiExact Gas Analyser
4 – Analyser user interface
4.8
The settings screen
Use the
and
soft keys to
highlight the required screen option, then
press the
soft key to display the
selected screen, as shown below:
Figure 6 – The Settings screen
Screen
Use [refer to section]
Comms Parameters
Configuring the communications parameters [A1.2 or A3.3]
Password
Changing the password [5.4.3]
Clock
Setting the clock time and/or date [5.4.6]
Regional
Changing regional settings (language and so on) [5.4.7]
Backlight
Adjusting the backlight timer duration [5.4.5]
Contrast
Adjusting the contrast of the screen [5.4.4]
Security
Selecting the security level [5.4.2]
Information
Viewing analyser system information [4.9]
Alternatively, press the
soft key to display the menu screen again.
4.9
The information screen
This screen shows information (such as the
analyser serial number and the version of
the operating software embedded in the
analyser) which is useful to the Servomex
support team.
Figure 7 – Typical information
screen
Note that the information shown on the screen will vary, depending on the analyser
model.
05410001A / Revision 6
19
