Servomex NanoTrace DF-760E, Инструкция по эксплуатации

Страница: 93 / 182

User Interface DF-760E 89
Figure 84: Oxygen Data Downloader Screen
7.6.5.1 Set Location
The set location function is used to choose a location from a list of existing locations
previously entered into the system (see Add Location on page 90). On the Moisture Data
Downloader screen Figure 84, use the
Next
key to move to the list of existing names and
then use the arrow keys ( and

to select the location desired. Then use the
Next
key
to move to
Set Location
and press
Enter
to accept the new location.
The action of setting a location starts the logging process and creates a new file. Changing
to a new location will, in turn, end the previous file and start a new one.
7.6.5.2 View Location
The view location function is used to view data previously stored in the system sorted by
location. On the Location Logger screen Figure 84, use the
Next key to move to the list of
existing names and then use the arrow keys ( and

to select the location desired.
Then use the Next key to move to View Location and press Enter. The View Location
Screen will appear as in Figure 85.
Figure 85: View Location Screen