Servomex NanoTrace DF-760E, Инструкция по эксплуатации

Страница: 63 / 182

User Interface DF-760E 59
Accept New Location
and hit
Enter.
The display will return to the Downloader Screen
and the name will appear in the list of available locations.
7.5.4.4 Delete Location
The delete location function is used to remove a location from the list of available names.
On the Moisture Data Downloader screen Figure 33, use the
Next
key to move to the list
of existing names and then use the arrow keys ( and

to select the location desired.
Then use the
Next
key to move to
Delete Location
and press
Enter.
A confirmation box
will then appear ( see Figure 36) and the user can either accept the deleted selection with
the
Enter
key or can hit ESC to cancel the action. If accepted, the name will be removed
from the list of available locations.
Figure 36: Delete Selection
7.5.5 View Moisture Logs Menu
View Logs allows the user to easily access past events that may be connected with past
operational changes (e.g., zero) or instrument upsets. Use the arrow keys (
and

to
scroll up and down through the list. If additional pages exits an arrow will appear at either
the top or bottom of the page. Pressing
ESC
will return to the main display.
Figure 37: Moisture View Logs SubMenu
7.5.5.1 Moisture Zero Log
The Moisture Zero Log reports on adjustments made to the moisture cell zero setting. The
date and time of the zero calibration is noted. The zero is listed in the notes section as
either Manual or Automatic. The letters Q, N and S in the notes section indicate the type
of acceptance criteria selected (Quick/Normal/Stable). The notes section also indicate if the
zero was aborted, failed due to timeout, or in the event of an Automatic Zero, if it were
scheduled. The time to perform the zero and the resulting zero reference also appear.