SerVision MVG200, Руководство по настройке и управлению, Страница: 18 / 241

SerVision Embedded Video Gateway System Guide
Configuring System Settings 17

SMS & E-mail: Event notification settings (see page 61)

AVV: Configuration of automatic uploading of video to an FTP server (see page 67)

FTP: Configuration of manual uploading of video to an FTP server (see page 74)

Schedules: Configuring the unit to automatically switch the running outline at specified times (see page 76)

Power Saving: Configuring sleep-mode (in development, for use with certain control-center applications;
MVG only)

Audio: Configuring microphones and speakers (see page 85)

GPS: Configuring GPS settings (MVG and CVG-M only; see page 88)

Save Settings: Saving configuration changes (see page 156)

Restart: Restarting the unit in order to fully implement configuration changes or improve system performance
(see page 197)


 To open the System Summary screen:

In the
Main Menu
, click System .
NOTE:
If Content mode is enabled in the TV-Out settings, a warning message appears at the top of the System
Summary screen:
For additional information, see Configuring the Monitor to Play Prerecorded Video , page 30.
General System Settings
The general system settings are the basic settings for the unit: the name of the unit, the port it uses for
communication, video resolution and type, and activation of certain optional features.
About the General System Settings
This section contains background information about the general system settings.
Ports
The unit has two access ports:

Port 10000, which is intended for configuration and is always open for incoming connections.