13
14
T: 0800 0124 382
T: 0800 0124 382
INSTALLATION
WATER SUPPLY CONNECTION
2
Screw the straight end of the hose clockwise to a 19mm (3/4’’) cold water tap until hand
tight (fig 8). Take care not to trap or kink the hose.
DRAIN HOSE CONNECTION
Do not connect your Washing Machine to a surface water drain.
Connect your Washing Machine to your household drainage system (fig 9).
For your Washing Machine to function properly the outlet end of the drain hose must be at a
minimum of 0cm and a maximum of 80cm from the ground.
CAUTION:
Check to ensure that the hose is not trapped, kinked, twisted, folded or crushed.
Do not attempt to extend the drain hose by adding extra sections.
Figure 8
Figure 9
a:
b:
Max height 80cm
Min height 0cm
a:
The drain hose
can be connected
to a standpipe, as
shown. The hose
must be between
0cm and 80cm
from the ground.
b:
The drain hose
can be connected
to a household
sink, as shown.
The hose must be
between 0cm and
80cm from the
ground.
