21
22
T: 0333 577 7232
T: 0333 577 7232
USAGE
Quick Freezing (SUPERFREEZE) Mode
This mode allows you to freeze prepared meals or large amounts of food quickly. To select the
quick freezing function:
Ensure that the zone where you wish to activate the superfreeze function is set as a freezer
(see page 25 for further information).
Press either the
or
button (depending on where you wish to freeze the
food) until the available temperatures have been cycled through and
and
appear on the Control Panel accompanied by an audible beep. The mode is activated once
stops flashing.
Please Note:
We recommend that Zone 1 be used for this function.
This mode will be automatically de-activated after 24 hours, or once the freezer compartment
sensor has reached a sufficiently low temperature. The zone will then return to its previously set
temperature.
Quick Cooling (SC SUPERCOOL) Mode
This mode allows you to cool prepared meals or large amounts of food quickly. To select the
quick cooling function:
Press
the
button until the available temperatures have been cycled though and
and
appear on the Control Panel accompanied by an audible beep. The mode
is activated once
stops flashing.
This mode will automatically be de-activated after 4 to 6 hours depending on the environmental
temperature or when the sensor in the refrigerator reaches a sufficiently low temperature.
Lights
Your Fridge Freezer contains a series of LEDs hidden within the door handles and an interior light
(that is illuminated upon door opening). To turn the LEDs and interior light on:
Press
the
button for at least 3 seconds until
is displayed on the Control
Panel.
To turn the LEDs and interior light off:
Press
the
button for at least 3 seconds until
is displayed. on the Control
Panel.
Please Note:
If the
mode is selected, the LEDs will be continuously illuminated unless
Night Sensor Mode has been activated (see below) in which case the LEDs will only illuminate
once your Fridge Freezer has detected that its is dark enough for them to do so.
Night Sensor Mode
This is an energy saving mode that only turns your LEDs on when the built-in sensor detects that
the ambient light is low enough for them to be required. To activate Night Sensor Mode:
Press
the
button and the
button simultaneously for at least 3 seconds until
is displayed on the Control Panel.
To de-activate Night Sensor Mode:
Press
the
button and the
button simultaneously for at least 3 seconds
until
is no longer shown on the Control Panel.
