22
You can select between showing the timer or the time of day. In any case the timer will emit an audible signal at the end of the selected period in order
to indicate that the time is over.
USE OF THE TIMER AND DIGITAL CLOCK (ON SOME MODELS)
Calling back the clock when the timer is active.
Press the HORA (HOUR) button when the timer is in operation; the digital display will show the clock, however, the timer will continue counting down
and will emit the audible signal when time has been completed. Press the TIMER button again to call the timer back to the display.
To modify or cancel the timer.
When the timer is active (the LED light is on), use the "+"or "-" buttons to change the time remaining, or press the TIMER button to cancel the
function.
The timer countdown is performed backwards. You will hear a signal when reaching 1 minute to finish the countdown. After this signal, the digital
display will begin counting in seconds. When the time is completed, a final signal will be heard. Press the TIMER button to stop the signal.
1. Press TIMER button to enter the edit mode.
2. Press and hold the "+" or "-" button to advance in 5 minutes segments. To change time by minutes, tap the
button without holding it.
3. Once the time lapse is set, press the TIMER button to start the countdown.
To activate the timer.
To set the time of day.
NOTE: The first time you connect the unit to the power supply or, after a power failure, the digital display of the clock/ timer will turn on and flash.
Press the button HORA (HOUR) to activate it.
1. Press the HORA (HOUR) button.
2. Use the "+" or "-" buttons to set the time. Press and hold the button to advance in 10 minutes segments at
a time. To change time by minutes, tap the button without holding it.
3. Press the HORA (HOUR) button to start the clock.
