1
Operat ion:
•
Attach a 3/ 4” garden hose to the autofill valve, and connect the other end of the hose to your water source.
•
Make sure the float that hangs from the autofill valve into the tank is free of obstruction and can move freely.
•
Turn the water supply on.
•
The autofill float will automatically shut-off the flow of incoming water when the solution tank is nearly full, and it will
allow the valve to open again once the water level has dropped to a predetermined level.
AUTO- FI LL
AUTO- FI LL
AUTO-FI LL HOSE
CONNECTION
Operation:
•
Before each use:
if necessary, unscrew the stainless steel filter at the bottom of the recovery
tank and clean it. Also make sure the float in the recovery tank is clean.
·
Attach a 3/ 4” garden hose to the dump pump outlet fitting on the back of the base of the machine.
·
Run the other end of the hose into a drain.
·
Turn ON the dump pump switch (switch is locat ed on the switch panel on the top of the machine).
· NOTE
: the dump pump is ‘self-priming.’ Y ou should see water start to flow within 30 seconds of
the pump turning on. I f water does not begin to flow, check the filter to see if it is plugged with
debris.
· After each job
: run clear water though the dump pump to wash out any chemical residue.
Remove and clean the stainless steel filter in the back of the tank. Reinstall the filter once it is
clean. Clean and empty the recovery tank.
AUTO- DUMP
Drain Hose
AUTO-DUMP
Power
Prime
Hose
Dump
Pump
Power Prime
Pedal
DANGER: alw ays unplug the King Cobra from the electrical outlet( s) before
cleaning or maintaining. Certain internal components are electrically live,
even w ith sw itches in their OFF position.
DANGER: DO NOT USE SOLVENTS, OR ANY CHEMI CALS THAT MAY BE FLAMMABLE,
EXPLOSI VE OR COMBUSTI BLE.
CAUTI ON: alw ays use a defoamer in the recovery tank to prevent w ater or
foam from entering the vacuum motor
.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
