ServerLink Dual Rail LCD Console
12
5 6
Right side screws &
bracket ( 2 screws & 1
bracket )
3 4
rolling ball set ( 1 rolling
ball set and 2 screws )
1 2
Left side screws &
bracket ( 2 screws & 1
bracket )
Caution
If LCD monitor is pulled all the way out to end, you will see two metal unlock plates extended
outside in both edges. To push the monitor back to the cabinet, press and hold these two
metal unlock plates together to flat and then push it back slowly and evenly until the metal
plates are moved inside the unit completely. Make sure to push safely and protect your
fingers from hurt.
Special Note:
Open Keyboard / Touch Pad Part & LCD Monitor Part Individually
In case you still want to pull the Keyboard / Touch Pad and LCD monitor independently, firstly you need to
remove the following parts in three locations. 1). Left side screws and bracket 2). Right side screws and
bracket 3). Rolling ball set. You have to unscrew and remove them in one time. After that, put them aside
and then you can pull keyboard / Touch Pad part and LCD monitor part individually. Please see the diagram
below.
Hold the handler of Keyboard / Touch Pad part in the lower floor,
and then pull it out.
