PUMP CLEANING INSTRUCTIONS
TABASCO
®
PUMP 88521
DISMANTLING CLEANING INSTRUCTIONS
Clean, rinse, sanitize and dry all parts before first use and after use daily. Wash, rinse & sanitize to local
health department regulations.
Server Products, Inc.
| 800.558.8722 | [email protected] | server-products.com
Manual 01958-RevA 100215
Loosen locking collar
and remove cylinder
from head assembly.
Remove spring from
cylinder.
Remove pinch valve
from head assembly -
pinch and gently turn
while pulling.
Take seal off of head
assembly by pressing
down with thumb. Do not
use sharp tool.
Fully disassembled pump.
Using supplied
brushes, fully wash
all parts with deter-
gent and hot water.
Fully rinse all parts
with clear water.
Sanitize parts following local
sanitation requirements.
Allow parts to fully air dry after
sanitation.
Reassemble pump by reversing
dismantling instructions.
When installing seal, flared end
should be down, away from piston
head.
When installing plastic cap onto
cylinder, press down firmly until it's
past the threading.
For questions regarding pump, reference the manual or contact customer service at (800) 558-8722.
1
3
2
4
7
8
9
10
Remove gaging collar
from head assembly.
6
Remove O-ring from
seal. Note this seal may
be red or blue in color.
5
