Page 8
Manual 01884-RevC 050917
TROUBLESHOOTING
FOOD PRODUCT OOZES OUT
AROUND LOCKING COLLAR?
• Ensure
seal
is properly installed on piston.
TIP:
Seal has a slight taper.
Install with flat side towards
top, flared side down.
NEED HELP?
Please be prepared with your
Model, P/N and
Series
located on the lid of the unit.
Example:
1.262.628.5600
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
SERVER PRODUCTS
LIMITED WARRANTY
GENERAL SERVICE,
REPAIR OR RETURNS
Server Products equipment is backed by a
two-year limited warranty against defects in
materials and workmanship.
For complete warranty information go to:
www.Server-Products.com
Before sending any item to Server Products
for service, repair, or return, contact Server
Products customer service to request a
Return
Authorization Number.
Merchandise must be
sent to Server Products with this number. Service
is extremely prompt. Typically, units are repaired
and ship out within 48 hours of receipt.
Merchandise being returned for credit must be in
new and unused condition and not more than 90
days old and will be subject to a 20% restocking
charge.
•
Food product
may be too thick or contain
a solid that will not pass through pump.
PROBLEMS WITH FLOW OR PORTIONS?
• If used: Ensure
gaging collar(s)
are undamaged
and properly installed on head tube.
•
Clean pump.
PLUNGER DOESN’T RETURN
TO TOP AFTER DISPENSING?
• Ensure that the
spring
is functional.
Replace broken spring if necessary.
• Ensure that the
washer
is installed
between the spring and piston head.
MODEL
XXXX
P/N
#####
SERIES
##X ##X
LEAKS NEAR THE VALVE BODY?
• Ensure
gasket
is properly installed.
Flat side of gasket should face up.
