Page 4
Manual #01750-RevB 061815
PART QTY DESCRIPTION
1
LARGE PINCH VALVE
1
PUMP DOME, BLACK
07389
1
PUMP HOUSING ASSEMBLY
1 DISCHARGE FITTING, .256, MED.
TIP: Squeeze the pinch valve
open before installation to
ensure it isn’t stuck shut.
HELP or ORDERING REPLACEMENT PARTS
TROUBLESHOOTING
262.628.5600 | 800.558.8722
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
GENERAL SERVICE,
REPAIR OR RETURNS
Before sending any item to Server Products for service,
repair, or return, contact Server Products customer
service to request a
Return Authorization Number
.
Merchandise must be sent to Server Products with this
number. Service is extremely prompt. Typically, units
are repaired and ship out within 48 hours of receipt.
Merchandise being returned for credit must be in new
and unused condition and not more than 90 days old
and will be subject to a 20% restocking charge.
SERVER PRODUCTS
LIMITED WARRANTY
• Ensure pinch valve is inserted in housing.
• Ensure connector is snapped fully in place to
fitment in pouch.
• Ensure pump is properly installed in unit.
• Clean pump thoroughly.
PRODUCT DOESN’T PUMP?
• Wet parts with clean water to help fit.
DIFFICULT TO ATTACH PARTS?
• Clean thoroughly. Food residue could prevent
a tight seal between dome and housing.
• Ensure dome edges are flush with housing.
DOME POPS OFF?
PINCH VALVE
PUMP HOUSING
ASSEMBLY
07389
DISCHARGE
FITTING
MODEL 07737
Server Products equipment is backed by a
two-year limited warranty against defects in
materials and workmanship.
For complete warranty information go to:
www.Server-Products.com
Please be prepared with the
Part Numbers
for your
items. Individual part numbers are listed above.
