LKD-15X User Manual
24
responds correctly then your touch panel is accurately aligned to your
monitor.
12. Touch [OK] button to exit and the [Reboot Message Dialog Box] will appear.
13. Remove the setup diskette from the floppy disk and click [Reboot] button
after [Installation Driver OK] appear.
14. If you choose [Right Button ON] when you complete installing the Software
Driver, you will find the Right Button Icon appeared on the right-down hand of
the screen.
15. To make changes to the Right button feature settings, click the [Onetouch
Icon]on the taskbar.To make changes to the COM port, mouse driver feature
settings, click the Start button choose Program, point to Onetouch
Config.exe icon.
* Note : If you are not satisfied with the screen alignment, select the [Retry]
button (This can be done by typing [R] on the keyboard).
