Servend Chillz Granitore 1, Руководство по обслуживанию

Страница: 18 / 40

18
Installation and Service Manual
USER MAINTENANCE
Before undertaking any cleaning and maintenance of external machine components, make sure
that the main switch is positioned on -0- and that the machine is unplugged.
Before performing any cleaning and maintenance operation on the machine, wear the personal
protections (gloves, glasses, etc.), which are recommended by the safety standards in force in the
country where the machine is used.
When performing the Cleaning and Maintenance operations, follow these instructions:
• wear protection accident-proof gloves;
• do not use solvents or inflammable materials;
• take care to avoid dispersing liquids in the sur-
rounding area;
• do not wash machine components in a dish-
washer;
• do not dry parts of the machine in a conven-
tional and/or microwave oven;
• do not immerse the machine in water;
• do not expose the machine to direct sprays of
water;
• for cleaning use only lukewarm water and a
suitable sanitizing agent (conforming to current
regulations in the user’s country) that will not
risk damaging machine components;
• on completing work, make sure that all protec-
tive covers and guards that have been removed
or opened are set back in place and properly
secured.
Cleaning and sanitization are operations that must be performed with utmost care and on a regular basis to guar-
antee the quality of the beverages dispensed and compliance with mandatory hygiene standards.
Each bowl must be cleaned and sanitized for a product change at least every 2 (two) days in com-
pliance with the current hygiene regulations in the user’s country. The stainless materials, plastic
and rubber used to manufacture said parts, as well as their particular shape, make them easy to
clean but do not prevent the build-up of germs and mold in the event of inadequate cleaning.
It is forbidden to clean or service the machine when it is plugged in and the main switch is positioned
on -1- .
To carry out maintenance and cleaning of the machine,
it is possible to remove the upper parts of the side pro-
tections, if necessary. Lift the upper part to remove them.
Once finished, fit the part in the side position again.