Serpent Truggy SRX8T-e, Инструкция по эксплуатации

Страница: 15 / 48

8x11x0.1
After building the differential with new gears, new differential
case and bearings, the diff may feel a little tight. The connected
parts need at least an hour run-time to create a perfect match.
Attention: When you assemble the diff with too much initial play, the
gears will not run-in properly and may wear quickly. After 1 or 2 hours
of running the car, re-check the gear-mesh
between the ring gear and the pinion. All parts
should have run-in properly now. You may
add or remove 8x11x0.1 shims as needed.
8x11x0.1
8x16x5
5x13x4
M3x22
13x16x0.1
M3x16
M5x4
23.1
23.2
8x16x5
5x13x4
M5x4
13x16x0.1
13x16x0.1
2
1
1
After 1 or 2 hours
of running the car,
re-check the gear-
mesh between the ring gear
and the pinion. All parts
should have run-in properly.
You may add or remove
13x16x0.1 shims as needed.
M3x22
M3x16
15
FRONT ASSEMBLY
STEP 22 STEP 23
BAG 5