Serpent spyder SDX4, Инструкция по эксплуатации

Страница: 9 / 48

9
REaR aSSEmBly
STEp 10 STEp 11
11.1
The pivotballs are used to ensure the complete free movement of the wishbones with the minimum
play. For assembling them correctly follow the next recommendations:
1- The M3 shims must be assembled always in the front side of the wishbones.
2- The front pivotballs should be fully tightened.
3- Fully tighten the rear pivot balls. In step 16-B adjust the correct wishbone play after assembling the
rear blukheads.
The wishbones are not symetrical. The location of the shock mounting position on the front and rear differ, so you have 4
positions in total. The default configuration is shown below.
REAR WISHBONES POSITION
LEFT LEFT RIGHT RIGHT
11.2
3.2x7x0.5
3.2x7x0.5
M2.5x4
M2.5x4
M2.5x4
REAR ANTIROLL
BAR ROD LENGTH
4 mm