Serpent S811 Cobra E 2.1, Инструкция по эксплуатации и справочник

Страница: 11 / 32

BAG
5
19
20
21
22
M3x16
Notice orientation of differential
2.5x13
8x19x6
M5x4
8x11x0.2
TIP
After building the differential with new gears a new differential case and
bearings, the differential may feel a little tight. The connected parts need
at least an hour run-time to create a perfect match. Attention: When
you assemble the diff with too much initial play, the gears will not run-
in properly and may wear quickly. After 1 or 2 hours of running the car,
re-check the gear-mesh between the ring gear and the pinion. All parts
should have run-in properly now. You may ad one or more extra shims on
the pinion or ring-gear, start of by placing 1 x 0.1mm more, and try again.
Use 14x15.6x0.2
shims to adjust
proper gear mesh.
Nylock nut
M3